Skip to content 
Professional Fuse Board Upgrades and Consumer Unit Replacement in Hertfordshire
Outdated fuse boards put your home at risk every single day. At Royston Electrical, we carry out fuse board upgrades and consumer unit replacement across Hertfordshire with care and full compliance. Our NICEIC-approved electricians work to the latest 18th Edition wiring regulations on every job.
Comprehensive Electrical Safety and Rewire Services for Your Home
Old electrical systems were not built to handle modern household demands. Most homes built before 2000 carry wiring and boards that fall short of current safety standards. A faulty fuse board can cause circuit overloads, persistent tripping, or in serious cases, an electrical fire. Getting the right upgrades in place protects both your property and the people living in it. We handle every aspect of domestic electrical safety, from single circuit repairs through to full rewires. Each job starts with a thorough assessment of your existing setup so we can identify exactly what needs attention and why.
Full Consumer Unit Replacement by Certified Electricians
A consumer unit replacement is one of the most impactful upgrades a Hertfordshire homeowner can make. We remove your old fuse board and fit a fully compliant modern unit with the correct protection devices installed throughout.
Fuse Board Upgrades to Modern RCBO Circuit Breakers
Traditional fuse wire offers very limited protection. Upgrading to RCBO circuit breakers gives each individual circuit its own dedicated protection. A fault on one circuit no longer affects the rest of your home.
RCD Protection Upgrade for Enhanced Electrical Safety
An RCD protection upgrade is essential for any home without current trip protection. RCDs detect dangerous current leakage in milliseconds and cut the power before serious injury can occur. They are a non-negotiable part of any safe electrical installation.
Complete Domestic Rewire Services for Older Properties
Homes in Hertfordshire built before the 1980s often contain wiring that has well exceeded its useful life. Our domestic rewire services strip out ageing cable and replace it with modern wiring that meets current regulations throughout.
Who We Are?
Royston Solar Solutions draws on our founder’s extensive project management and renewable energy experience, offering homeowners a trusted and reliable partner for the installation and supply of renewable energy products, including solar, battery storage, and more.
Why Choose
Royston Solar Solutions
Competitive Pricing
We offer premium, cost-effective solutions for renewable energy assets, tailored to meet the needs of both domestic and commercial properties.
Guarantee
All our installations are backed by a comprehensive “no-quibble” guarantee, giving you complete peace of mind and confidence in our work.
Prompt Service
We provide a detailed installation schedule and work flexibly around your commitments to minimize disruption to your daily activities.
Experienced Team
Our team brings over a decade of expertise in implementing renewable energy solutions, delivering exceptional results with professionalism and precision.
Understanding Your Home Electrical System Upgrades
A lot of homeowners are unsure what their electrical system actually contains and why certain components matter. Getting to grips with the basics helps you make informed decisions about what your home needs and when to act on it.
Why Upgrade from Old Fuse Boards to RCBO Circuit Breakers?
Old rewireable fuse boards work by melting a piece of fuse wire when a fault occurs. This process is slow and imprecise. RCBO circuit breakers, by contrast, respond to both overloads and earth leakage faults in a fraction of a second. They also allow each circuit to be isolated independently, which makes fault-finding far quicker and safer for the homeowner.
The Importance of RCD Protection in Modern Homes
An RCD watches the flow of electricity through a circuit at all times. As soon as it spots even a slight imbalance, it shuts off the supply within 30 milliseconds. This imbalance can happen when current leaks through a person or a damaged cable. Without RCD protection, touching a live conductor can kill. Furthermore, families with young children and owners of older properties benefit most from this upgrade.
Complete Mains Board Modernisation: What to Expect
Mains board modernisation typically takes between four and eight hours for a standard property. We isolate your supply, remove the old unit safely, and fit the new metal clad consumer unit with the correct number of ways for your circuits. We then test every circuit before restoring power and issue the relevant certification paperwork on completion.
Your Guide to Electrical Safety and Rewiring in Hertfordshire
Understanding when your home needs attention, and what to do about it, is the first step toward a safer property. Here is a practical guide for Hertfordshire homeowners who want to stay on top of their electrical safety obligations.
Signs Your Home Needs a Consumer Unit Replacement
Several warning signs point toward a consumer unit that has reached the end of its serviceable life. Acting on these early prevents more serious problems developing.
- Fuses blowing repeatedly without an obvious cause
- A plastic consumer unit rather than a metal clad unit
- No RCD protection fitted on socket or lighting circuits
- Scorch marks, burning smells, or discolouration near the board
- The board was last replaced more than 25 years ago
How Often Should You Book an Electrical Safety Inspection?
If you own your home in Hertfordshire, book an electrical safety inspection every ten years. This keeps your property safe and up to date. Landlords, however, must act sooner. The law requires an inspection every five years, and you must give each tenant a copy of the certificate. Besides routine checks, some situations need an earlier inspection. For example, if you are buying or selling a home, doing major renovation work, or adding an EV charger or hot tub, book an inspection straight away.
The Complete Domestic Rewire Process Explained
A full domestic rewire involves replacing every circuit cable, socket outlet, light fitting, and switch in the property. It is a significant undertaking but the right choice for homes where the existing wiring poses a genuine safety risk. Work typically takes two to five days depending on property size. We plan around your schedule where possible and aim to minimise the time any area is without power.
Frequently Asked Questions: Electrical Safety and Consumer Units
Your consumer unit needs replacing if it sits in a plastic casing, lacks RCD protection, or contains old-style rewireable fuses rather than modern circuit breakers. Additional indicators include circuits tripping without explanation, any signs of heat damage near the board, or a unit that is more than 25 years old. A qualified electrician can confirm this during a straightforward visual assessment.
A traditional fuse board uses wire that melts when a fault occurs. It handles basic overloads, but nothing more. A modern RCBO consumer unit, on the other hand, does much more. It protects each circuit against both overloads and current leakage. So if one circuit develops a fault, the rest of your home stays on. As a result, your home becomes significantly safer overall.
Yes. Amendment 3 of the 18th Edition wiring regulations requires metal clad enclosures for all new and replacement consumer units. Therefore, plastic units are no longer acceptable for any new installation work. Existing plastic units do not need immediate replacement but must be changed when the unit is next upgraded.
A straightforward consumer unit replacement on a standard domestic property typically takes between four and eight hours from start to finish. This covers isolating the supply safely, removing the existing unit, fitting and wiring the new board, testing every circuit individually, and issuing the required completion certificate. More complex properties with additional circuits or older wiring may require additional time on the day.
A complete domestic rewire becomes necessary when an electrical safety inspection identifies deteriorated insulation, inadequate earthing, or wiring that cannot be brought up to current standards through targeted repairs. Homes with rubber or lead-sheathed wiring, properties that have not been inspected in over 30 years, and houses showing recurring unexplained faults are all strong candidates. An inspection report will confirm whether a full rewire is the right course of action.
If you own your home in Hertfordshire, book an electrical safety inspection every ten years. This keeps your property safe and up to date. Landlords, however, must act sooner. The law requires an inspection every five years, and you must give each tenant a copy of the certificate. Besides routine checks, some situations need an earlier inspection. For example, if you are buying or selling a home, doing major renovation work, or adding an EV charger or hot tub, book an inspection straight away.
Start Saving with a Free,
No-Obligation Quote!
Connect with our team today to discuss your needs. We’ll conduct a thorough analysis of your current energy usage and design a customized, fully integrated renewable energy system tailored to your home or business.
Save Money
Reduce your energy expenses by up to 80%.
Earn income
Earn by exporting surplus energy with SEG accreditation and solar certifications from Royston Solar Solutions.
Take Control
Gain energy independence and protect yourself from rising costs.
